A Craftsman bungalow, re-guttered from end to end
Craftsman bungalow, Larch Street
Run sheetJob 261014
- Profile
- K-style, seamless
- Size
- 6 in
- Metal
- .032 in aluminium
- Run
- 186 ft
- Time
- 1 day
- Cost
- $3,940 all in
Booking fall installs
Gutters & drainage · Alder Falls, OR
Rain goes where it should.
Seamless gutters rolled to length in our van outside your house, hung every two feet, pitched to the outlet and tested with a hose before we leave, with a written estimate first and a twenty-year warranty after.
- a foot of seamless gutter
- $11–$18
- between hangers, always
- 24 in
- workmanship warranty
- 20 years
What we hang
Every drop off the roof, one crew
From a new run of seamless gutter to a fall flush under the firs: six kinds of work, all done by our own people from our own ladders.
How a gutter goes up
From the tape measure to the hose test
Every gutter we hang goes up the same way, stage by stage, and nobody leaves until water has run through it and out of every downspout.
Prices →- 01
Measure and check
Every run measured end to end, the fascia and the drip edge checked for soft wood and gaps, and where each downspout can go agreed with you.
- 02
Roll it on site
The gutter is rolled from a coil in the machine in our van to the exact length of each run, so there are no seams except at the corners.
- 03
Hang it
Hidden hangers screwed into the rafter tails every 24 inches, the back of the gutter tucked under the drip edge so no water gets behind it.
- 04
Pitch it
A quarter inch of fall every ten feet toward each outlet, checked with a level and a string line, so nothing stands in it.
- 05
Downspouts and drains
Outlets cut, downspouts fastened to the wall and turned onto splash blocks or piped into drains well away from the foundation.
- 06
Guards and the hose test
Guards fitted where you want them, then a hose run at the high end of every run until water comes out of every downspout.
Projects
Hung this year, run sheet and all
A few jobs from this year: what we hung, how many feet, how long it took, what it cost, and the run sheet the crew worked from.
Copper half-rounds on a brick Tudor
Brick Tudor, Hawthorne Court
Run sheetJob 260821
- Profile
- Half-round
- Size
- 6 in
- Metal
- 16 oz copper
- Run
- 142 ft
- Time
- 4 days
- Cost
- $7,850 all in
Guards and drains for a farmhouse under the firs
Farmhouse, Orchard Grange Road
Run sheetJob 260509
- Profile
- K-style, existing
- Size
- 6 in
- Guards
- Stainless micro-mesh
- Run
- 210 ft
- Time
- 2 days
- Cost
- $5,260 all in
- hanging gutters in Alder Falls since
- 2006
- houses with our gutters on
- 3,400+
- installers, all ours
- 7
- of fall every ten feet
- ¼ in
- workmanship warranty
- 20 yrs
Where the vans go
Larkin Gutter Co. 1180 Mill Race Road Alder Falls, ORThe vans leave the shop on Mill Race Road at half past seven. We hang and clean gutters in Alder Falls and every town within twenty kilometres, all year round, rain or shine.
Get directions
Guides
Notes from under the eave
How often do gutters need cleaning?
Once a year in the open, more under maples and firs: how to tell when yours are due, and what a clogged gutter costs if you wait.
Five-inch or six-inch gutters?
What the extra inch buys you, when a house needs it, and why the downspouts matter just as much.
Before the first big storm: a gutter checklist
Ten minutes with a pair of binoculars and a hose before the autumn rains: what to look for and what to leave to us.
Care notes, four times a year
Short notes from Nora: when the firs drop their needles, what to check before the first big storm, and when your gutters are due for a flush.
Overflowing, sagging or just tired? Let’s take a look.
Tell us what’s going on and send a photo if you have one. We’ll come out, measure every run, check the fascia and the downspouts, and leave you a written estimate.
